How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chris Your Own Question
chris
chris, Ford Mechanic
Category: Ford
Satisfied Customers: 3521
Experience:  ASE Master -Ford senior master-20 years experience
9504203
Type Your Ford Question Here...
chris is online now
A new question is answered every 9 seconds

2002 explorer, door ajar light stays on, i narrowed it down

Customer Question

2002 explorer, door ajar light stays on, i narrowed it down to the rear liftgate. is it possible to cut one of the two wires or maybe splice them together to bypass the sensor?
Submitted: 1 year ago.
Category: Ford
Expert:  chris replied 1 year ago.
the liftgate door and ligate glass both have ajar switches that are in line with each other, so remove the liftgate panel and find the white/violet wire going to the liftgate glass ajar switch and cut this wire and ground it , this will show the liftgate glass and the lift gate door to be shut all the time, you can use the ground from the liftgate door ajar switch witch is a black wire ,,, so cut the white/violet wire to the glass ajar switch and tie it to the black wire on the liftgate door ajar switch , the black one and then these doors will show to be shut all the time,
-
Chris

Related Ford Questions