How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

F250: Trying to set up aftermarket ring and pinion on f250

Customer Question

Trying to set up aftermarket ring and pinion on f250 using motive gears depth on pinion using a strait edge across career clamp surface measures dead on 3.190 just like stamped on head of pinion got backlash at 9 thousands have painted gears and looked at pattern according to chart the pattern is not very good I have moved it in and out several time and can't seem to get rite pattern can send you pic of latest pattern if you would like please advise
Submitted: 2 years ago.
Category: Ford
Expert:  Scott W. replied 2 years ago.
Hello my name is Scott
Expert:  Scott W. replied 2 years ago.
Go ahead and send picture.
Customer: replied 2 years ago.

Customer: replied 2 years ago.

Do not know how to get pics to your response is there an email address to send them to

Expert:  Scott W. replied 2 years ago.
Just use the paper clip icon and transfer the picture to that.