How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy Your Own Question
Jeremy
Jeremy, Certified Diesel Technician/Electrician
Category: Ford
Satisfied Customers: 3280
Experience:  ASE, NATEF Engines and Electrical certified, EPA 608/609
9290743
Type Your Ford Question Here...
Jeremy is online now
A new question is answered every 9 seconds

Ford 350: 2006 F350 Having brake problems

Customer Question

2006 F350 Having brake problems
Submitted: 2 years ago.
Category: Ford
Expert:  Jeremy replied 2 years ago.
Hi! My name is ***** ***** I will do my best to assist you with your concerns.
Did you bench bleed the master cylinder before putting it on the truck?
Is this gas or diesel? If gas, is the brake booster good with no vacuum leaks? If diesel, is the steering fluid good and the system been bleed as well?
Customer: replied 2 years ago.

it diesel yes I bleed master cylinder used 2 cans of fluid is it abs

Expert:  Jeremy replied 2 years ago.
If you bleed everything, the only step would be the air in the ABS module. You will need to connect a scanner and activate the module for bleeding in order to have it to bleed. That is the only thing left that can cause soft pedal on your brake system if the rest of the bleeding was done.
If you don't have a scan tool, I would do a gravity bleed or use a hand power bleeder and pull the fluid out to get the air from the ABS.
With you doing all the work you did, most likely the air is in the ABS module and is trapped in there.
Customer: replied 2 years ago.

Where do I bleed the ABS module from? I do not have a scanner.

Customer: replied 2 years ago.

Thanks for the assistance. But I solved the problem by myself . My last

question was at 8:26 am central time, I never did get a response to my question. My problem is solved without a resolution from you.

Expert:  Jeremy replied 2 years ago.
I didn't get on until now and your follow up was 12 hours after my last contact. I did guide you on the rest, so you can't say I didn't completely assist you. Either way, I'm glad you got it resolved with the bleeding of the ABS.