How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask James Your Own Question
James
James, Ford Technician
Category: Ford
Satisfied Customers: 3589
Experience:  Ford Senior Master Tech, Ford gas and diesel expert, ASE Certified
74859263
Type Your Ford Question Here...
James is online now
A new question is answered every 9 seconds

Mustang Gt: Stock 2006 Mustang Gt going into limp mode throwing

Customer Question

Stock 2006 Mustang Gt going into limp mode throwing codes of p2105,p061b,p0345,p0349
Submitted: 1 year ago.
Category: Ford
Expert:  James replied 1 year ago.
Hello and thanks for choosing just answer. Are the same codes setting even after you changed these parts?
Customer: replied 1 year ago.
YES
Expert:  James replied 1 year ago.
I would attempt to update the pcM. After the parts you have replaced I have seen the pcM at fault numerous times. If the pcm update doesn't correct this concern I would recomend replacing the PCM. That used to be the entire test for this code but it was recently changed.