How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Ford
Satisfied Customers: 15114
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Ford Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

Fusion: How do I get the ends of the bumper cover loose on

Customer Question

How do I get the ends of the bumper cover loose on an 07 Fusion. I can't see any bolts or screws after removing the inner fender.
Submitted: 1 year ago.
Category: Ford
Expert:  Tim Mohr replied 1 year ago.
Hi, my name is ***** ***** are 3 push pin connectors on each sdie for the fender slash shiel, and 4 screws on each side to remove, below is the complete preocedure for removing the bumper cover,Tim




Exploded View

All vehicles

  1. With the vehicle in NEUTRAL, position it on a hoist.
  2. Remove the 6 pin-type retainers (3 each side).
  3. Remove the 8 fender splash shield screws (4 each side).



  1. Remove the 4 air deflector bolts.

MKZ only



  1. Remove the 5 bolts from the top of the radiator grille.

Fusion and Milan only



  1. Remove the 2 bolts and the 2 pin-type retainers from the top of the radiator grille.
Customer: replied 1 year ago.

I saw this lay out and ironically it does not tell how to deal with the ends. I finally figured it out and there is a plastic piece that is bolted to the car and clips to the bumper cover. The clips needed to be pryed apart to release the ends. But thanks for your efforts

Expert:  Tim Mohr replied 1 year ago.
glad you got it fixed,Tim