How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I went out to start my

Customer Question

I went out to start my truck this morning at my girlfriend's house after driving it there last night with no problem and it won't turn over....the power comes on inside and I tried jumping it with another vehicle with no even a turn over once...what could it be?
Submitted: 1 year ago.
Category: Ford
Customer: replied 1 year ago.
I do have a Viper alarm system as well
Expert:  A. Penland replied 1 year ago.
Hello and thanks for using JustAnswer.I will try my best to help you with your question.
Can you give me the VIN #?
Ford made two different model F150s in 2004.
Customer: replied 1 year ago.
1FTPX125X4NB is the first 12 Digits
Expert:  A. Penland replied 1 year ago.
I'll need all 17 digits.
I need to see if it is the Heritage body style or the New body style.
Customer: replied 1 year ago.
new body style, eleventh generation (2004-2008)
Customer: replied 1 year ago.
Never mind, I fixed it myself
Customer: replied 1 year ago.
The answer is.....I went and bought a OBD II for $50 and plugged it into my truck. It gave me a code and I googled it. The code was P1237 which is either the FPDM (Fuel Pump Driver Module) or Fuel Pump. I bought both because my truck is getting old. I replaced the FPDM first and fired it up the first time. I will still replace the fuel pump because I can do it myself thanks to going to VoTech 20 years ago and getting ASE certified in 8 different components of the vehicle Mr. Penland. It is all of the electrical components that are new that throw me off.
Expert:  A. Penland replied 1 year ago.
Thank you for the update. Sorry I could not help you.