Hello I'm Paul and I will help you with an Answer to your Question
you need to clear the fault before the new Actuator will function
I am attaching information on this
click here for reset procedure
Remember to rate my answer positive so I get credit for my help.
If you need more help just log in to the site and reply the question will remain for follow up.
that was very helpful and i will rate you...one other thing is my oringinal actuator was not bad the ac was not blowing cold so i thought it was the actuator but it was the vacume lines red\black\white..etc...but i had thrown the old actuator away...do u think the trouble still is that my system needs to be reset
could have triggered when you unplugged the actuator
you will know if there is a fault stored when you do the reset
because you remvoved and replaced it a couple times I would suspect the system set a fault and has shut down the actuator
remember to rate my answer so I get credit for my help
if you need follow up the question will remain on the site just log in and reply