How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike S. Your Own Question
Mike S.
Mike S., ASE Certified Technician
Category: Ford
Satisfied Customers: 6794
Experience:  ASE Certified Master Technician
20625509
Type Your Ford Question Here...
Mike S. is online now
A new question is answered every 9 seconds

I have a 1987 minni winnie Rv on ford E350 chassis with 7.5

Customer Question

I have a 1987 minni winnie Rv on ford E350 chassis with 7.5 liter 460. My fuel sending unit is toast. what is the part number for this model
Submitted: 4 years ago.
Category: Ford
Expert:  Mike S. replied 4 years ago.

Is this a 4bbl carb or fuel injected?

I found this page although they don't give the first 2 digits of the part number if you contact them, they will tell you the first 2 digits.

http://www.fordpartsgiant.com/partlist/8-cyl-7-5l-460-c-i-d-gas-e250-350-lines-over-8500-g-v-w-page-b~1987-ford-e350-super-duty-1898854-18872971-18873385.html

Go down to PNC 9275.

There are several listed for different applications. It's either **UZ-9275-A with a 18 gallon tank or a **UZ-9275-E with a 22 gallon tank.

Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here
View Full Image

Attachments are only available to registered users.

Register Here

Customer: replied 4 years ago.

this is not what my part looks like. This is an e350 mini winnie winnebago


model wf426rt with a single 40 gallon gas tank behind the axle with a carbed 7.5 liter gasoline engine


Also, an aftermarket inline fuel pump was installed.


can you confirm if the following sending unit part number will work- Airtex E2071S

Expert:  Mike S. replied 4 years ago.

This says with 36 Gal. Tank. http://www.autopart.com/fuelpump/FuelPump1991FORDE-350ECONOLINE.htm

Elsewhere on that page they do list 2 for a 40 gallon tank, E2031 TO 6-91 and E2060S FROM 6-91 .

They are fuel pumps.

Sending units are here but I still don't see any for a 40 gallon tank, http://www.autopart.com/partsout/1987/FORD_E-350ECONOLINE/4436.htm

Customer: replied 4 years ago.


yes, I was wrong. this is a 36 gallon tank. The previous owner must have removed the fuel pump from the original sending unit and installed an inline pump. I will try to go back to the original configuration.


 


Thanks for your help

Expert:  Mike S. replied 4 years ago.

These 2 stick out because you said, "believe it has three outlets due to the generator."

3 Port (w/aux. generator), w/36/40 gal. tank gas-cutaway (7.5L) & 4.9L, 1987/ 1989 ; Ford 350 Series

9H307

**UZ-9H307-A

or Includes outlet for generator 3 port #E6US 9H307-AB, Cutaway with 36/40 gal. aft axle tank, 1986/ 1987 ; Ford 350 Series

**UZ-9H307-F Sender And Pump Assy Replaced by: **UZ-9H307-FA

8th from bottom, http://www.fordpartsgiant.com/partlist/8-cyl-7-5l-460-c-i-d-gas-fuel-system-and-related-parts-f250-350-lines~1987-ford-e350-super-duty-1898854-18872971-18873287.html

Expert:  Mike S. replied 4 years ago.
Ok, both of those were also 36 gallon

Related Ford Questions