How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask A. Penland Your Own Question
A. Penland
A. Penland, Ford Senior Master Technician, ASE
Category: Ford
Satisfied Customers: 6212
Experience:  ASE Master Certified, ASE Advanced Gasoline Engine Performance
14865528
Type Your Ford Question Here...
A. Penland is online now
A new question is answered every 9 seconds

1994 Econoline 150 Van Rear Door Latch need cable hook-up

This answer was rated:

1994 Econoline 150 Van Rear Door Latch
need cable hook-up diagram.

Hello and thanks for using Just Answer.I will try my best to help you with your question.

Below is a diagram of the cables.

graphic

Check the end of the cable. There should be a slot in the end of the plastic cable. This slot clips the cable into the latch. It it is broken loose of missing the latch assembly will have to be replaced to get the cable.

Customer: replied 4 years ago.


the diagram is too small to see exact hook up. i'm looking at full screen but just not a big enough image.

If you click on the image, it will open in another window and be larger.
Customer: replied 4 years ago.


already have clicked on image but still tooo small to see clearly

Let me see if I can make it bigger.

graphic

Customer: replied 4 years ago.


still can't see the latch end that you don't show. there is a great close-up of view A but the other end is the problem and i need a close up of that connection.

Is there a notch in the cable line in view "A". If not, you will have to replace the latch to get the replacement cable. Ford only sells the cable with the latch.

Customer: replied 4 years ago.


sorry sir but what do you mean by "notch" ?

I circled it in the diagram below.

graphic

There is a slot in the black plastic cable that will fit onto the latch as in view A.

If there is no slot or there are 2 black plastic pieces at the end of the black plastic sleeve, the latch assembly will have to be replaced.

The most common cause of the cables coming off is the plastic sleeve breaks where it clips onto to the latch.

A. Penland and 6 other Ford Specialists are ready to help you

Related Ford Questions