How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, Technician
Category: Ford
Satisfied Customers: 23473
Experience:  Independent Shop Experience, 2 Year Automotive Diploma, & Access to Information Database
Type Your Ford Question Here...
Dan is online now
A new question is answered every 9 seconds

Ford E250 Econoline: need fuse location for OBD fuse in my

This answer was rated:

need fuse location for OBD fuse in my 2000 ford e250
Welcome to JustAnswer, my name is XXXXX XXXXX I'm here to help get your problem resolved. The 20 amp fuse in location 23 of fusebox is for the data link connector. Remove/reinsert fuse a few times just to make sure its not a poor connection. Fuse 11 and 20 get power from the same source so if those fuses have good voltage this means fusebox needs to be replaced. You could bypass by running a wire from battery power to fuse 23..Or from fuse 20 to 23. Let me know how it goes or if you have any questions at all, thanks.
Dan and other Ford Specialists are ready to help you