2007 ford fusion, 2.3, loses power. wrench light on for 2 days. no other lights are on. need to release gas peddle then press again to get more acceleration. brought to auto parts store for diagnostic/trouble code. no code found. any clues?
Thanks for your question. Sorry you're having car problems. If I go off line, just leave a message and I'll be right back. DO NOT leave feedback yet. It's possible that the throttle body is the cause, BUT, if you're check for codes with a code reader, that won't show all the codes in ALL the different modules, only the PCM. A scan tool would be needed for these other tests for codes and throttle body functionality. Thanks, Ron
Please note; your Deposit doesn't constitute a payment. Please be sure to rate OK SERVICE, GOOD SERVICE OR EXCELLENT SERVICE /3-5 STARS /SMILEY FACES to complete transaction or ask for more help by clicking REPLY TO EXPERT.
Positive feedback is always appreciated. Please note that if you have a subscription service you still need to rate the same as mentioned above, EXCEPT you are not charged again.
Please note the 1 to 2 faces equal (POOR AND BAD SERVICE) are a NEGATIVE rating. Before choosing one of these, please reply first so that I can further help you,
Thank you, Ron
Please note: not every answer I give you is something you were hoping to hear, even though it is true, such as; (it’s more expensive than you wanted to spend, or you will need to have a professional repair shop do the diagnostics and /or repairs due to complexity reasons).