How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kenny Z. Your Own Question
Kenny Z.
Kenny Z., Ford Senior Master Tech
Category: Ford
Satisfied Customers: 5211
Experience:  Auto Trans, Drivability and Electrical Specialist
Type Your Ford Question Here...
Kenny Z. is online now
A new question is answered every 9 seconds

Ford Mustang GT: i am replacing the vacuum hoses for the purge

This answer was rated:

i am replacing the vacuum hoses for the purge valve on a 1994 mustang gt. where does the one line run to from the purge valve to the passengers side fender? cant find the end to replace the hose

Hello and thanks for your question.

It runs to the carbon cannister which is mounted to the front fender apron. See picture below.


Kenny Z. and 2 other Ford Specialists are ready to help you