I dont have any info on a 2012 but I believe it is the same as a 2011 if it is the inertia switch is located in the drivers kick panel.
can i check and get back in a few minutes
no:-/...I will opt out maybe someone else has some more up to date ford info
are you going to respond soon
In the event of a moderate to severe collision, the vehicle is equipped with a Fuel Pump (FP) shut-off feature that is initiated by the event notification signal.
The event notification signal is a signal provided by the Restraints Control Module (RCM) to the FPCM . Signal communication between the RCM and the FPCM allows the PCM to shut-off the FP .
Should the vehicle shut off after a collision due to this feature, the vehicle may be restarted by first turning the ignition switch to the OFF position and then turn the ignition switch to the ON position. In some instances the vehicle may not start the first time and may take one additional key cycle.