How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Repair1014U Your Own Question
Repair1014U
Repair1014U, Repair Shop Ower
Category: Ford
Satisfied Customers: 709
Experience:  Diagnosticas & Electrical
60340645
Type Your Ford Question Here...
Repair1014U is online now
A new question is answered every 9 seconds

2008 Ford F350: doesnt work..Fold..power to Drivers side mirror is out

Customer Question

My 2008 Ford F350 Drivers Mirror won't do anything. Power Mirror doesnt work, Power Fold, Power Telescope. It's like all power to Drivers side mirror is out. Passenger side mirror works fine. I thought maybe the mirrors had separate fuses so I checked that. Fuses only for Power Mirrors and Telescope. Any thoughts?
Submitted: 4 years ago.
Category: Ford
Expert:  Repair1014U replied 4 years ago.
Hello,

ok it could be the switch, or the relay in the junction box, or the PCM has lost signal.

CLICK HERE for trouble shooting Chart

CLICK HERE for Diagnosing


Here is the wire diagram for you

Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here
View Full Image

Attachments are only available to registered users.

Register Here

Thank you and please let me know if you need more help.
Customer: replied 4 years ago.
I went through all of your info and did what you suggested, but none of that was the issue. After taking door panel off, somehow, a connector behind the vapor barrier had come unplugged. May want to mention this in your answers for the future as this could have been the 1st thing to check and saved a lot of time and frustration
Expert:  Repair1014U replied 4 years ago.
Thank you very much for letting me know. I did not know that and will keep that in mind for the future. Thank you again so much for letting me know.

Related Ford Questions