88 bronco ;replaced rotors,brake pads callipers and wheel bearings ,,,adjusted wheel bearings to specs,,wheels spin freely when jacked up but when driving even as few as 5 miles the front hubs become to hot to touch...you can smell them when you stop...any sugestons??
Optional Information: Make: Ford Model: bronco Year: 1988 Already Tried: re adjusting and repacking bearings,,re bleeding brakes
Hi and Welcome to Just Answer! My name is XXXXXX XXX I will do my best to help.
if you did not have this problem before working on the truck, then you must recheck your work, make sure you have not twisted brake flex hoses when attaching calipers to braket.
if all is good check master cylinder pushrod adjustment.