How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch
Lurch, Ford Cert.
Category: Ford
Satisfied Customers: 20530
Experience:  Ford Cert., Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Ford Question Here...
Lurch is online now
A new question is answered every 9 seconds

replace serpintine belt tensioner ON A 2008 FORD E250 4.6 litre van

Customer Question

HOW TO REPLACE SERPINTINE BELT TENSIONER ON A 2008 FORD E250 4.6 LITRE VAN
Submitted: 4 years ago.
Category: Ford
Expert:  Lurch replied 4 years ago.

 

 

here is Ford Manual procedure

 

Remove the accessory drive belt.

Remove the accessory drive belt tensioner bolts (3) and the tensioner.

 

To install, tighten to 25 Nm (18 lb-ft).

To install, reverse the removal procedure

 

click link below

 

REMOVE BELT

 

DIAGRAM

 

 

 

Your DEPOSIT is not payment

I have sent the information you have requested & have answered .
If you have more questions about a different problem or area, it is considered to be "additional" & may have to Relist.

 

Expert:  Lurch replied 4 years ago.

 

here is Ford Manual procedure

 

Remove the accessory drive belt.

Remove the accessory drive belt tensioner bolts (3) and the tensioner.

 

To install, tighten to 25 Nm (18 lb-ft).

To install, reverse the removal procedure

 

click link below

 

REMOVE BELT

 

DIAGRAM

 

 

 

Your DEPOSIT is not payment

I have sent the information you have requested & have answered .
If you have more questions about a different problem or area, it is considered to be "additional" & may have to Relist.