need power to the factory trailer harness on 2007 ford escape put in #1 fuse
Country: United StatesMake: FordModel: Escape XLTYear: 2007Engine: 2.3
put in #1 fuse
Hi and Welcome to Just Answer! My name is XXXXX XXXXX X will do my best to help. Do you have power at fuse #1 when lights are turned ON? and ignition is in On position?
no power nothing the fuse did not stay in so no connections at the fuse box the harness connection is in the back under bumper obviously is set up for the hook up manual says #1 fuse is trailer but no contacts in fuse box to hold fuse in
if your vehicle is not equipped with trailer option, then you can wire it as an addition.
you will send to splice into the existing wiring harness on the truck. I will try to send you wiring diagram to help you find proper wires. you can install in line fuse to protect truck.
17 YEARS HANDS ON EXPERIENCE, TRUCK&COACH TECHNICIAN LICENCE
please click H E R E to see page 1
please click here for page 2 -
if you are checking fuse one in Engine compartment fuse box - it is not used
trailer fuse is in Smart Junction box - fuse box behind dash.