Hello again, John. I was able to easily replace my EGR valve, thanks to your excellent directions.I want to replace the air filter. My truck has 92k miles on it and has never had the air filter replaced.(I know, this is a bad thing.)It has been impossible to get the filter out. I have undone the clips on both ends of the filter housing but I am unable to lift the cylinder out. Any suggestions? Also, will a K&N filter change how the truck runs?
Model: F250 SUPER DUTY
Year: 2004 6.0 diesel
I always loosen the clamp and slide the rubber air intake boot off of the filter housing then pull up on the housing and remove the entire assembly and change filter out of vehicle, and for the K&N filter i do not recomend it for the simple fact of dusting the turbo,
master ase certified,senior master ford certified