On 1997 ford e350 with 7.3l powerstroke diesel, number 3 fuel injector is failing. I have got the inj loose from the head but, there is not enough room to pull it out. Any other injector would clear but this one is in line with the compartment for the a/c core, any ideas on a way to get enough room to remove and replace the injector.
Pulled valve cover, pulled bolts out of injector, popped injector out of it's seat, it's loose, but not enough room to pull clear of head
Hello and Welcome to Justanswer,My name is XXXXX XXXXX X am here to try and assist your with your question.The #3 and #5 injector are the tight ones and the engine has to be lowered. I have enclosed the Factory steps to get them out.If removing injector 3 or 5, perform the following:
23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs