How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pavlin Koev Your Own Question
Pavlin Koev
Pavlin Koev, CERTIFIED TECHNICIAN
Category: Ford
Satisfied Customers: 3483
Experience:  17 YEARS HANDS ON EXPERIENCE, TRUCK&COACH TECHNICIAN LICENCE
41577536
Type Your Ford Question Here...
Pavlin Koev is online now
A new question is answered every 9 seconds

special: ipr Valve on a 2002 7.3 powerstroke diesel..socket..connector

This answer was rated:

Hi How easy is it to change a IPR Valve on a 2002 7.3 Powerstroke diesel? Do I need a special socket cause of that connector on pump? do I have to remove the pump too? thnx!!

Pavlin Koev :

Hi and Welcome to Just Answer! My name is XXXXX XXXXX I will do my best to help.

Pavlin Koev :

you need to remove turbo charger and fuel filter housing

Customer:

Ok but i can leave the HPOP in place?

Pavlin Koev :

yes

Pavlin Koev :

it is bolted to the side, will send you instructions

Customer:

do they make a special tool to take the IPR Valve out? or do I just use a wrench?

Pavlin Koev :

you need deep 27 mm socket with thin wall

Customer:

and the connector on the side fits inside socket then?

Pavlin Koev :

No, there is a nut, which is easy to remove, then pull out solenoid with connector

Customer:

that nut you are refering to is that the one builtinto the sensor that butts up against the oil pump?

Pavlin Koev :

it is the one you see on the picture I have sent

Pavlin Koev :

after you pull out solenoid you will see valve

Customer:

ok so your saying i should turn out the little nut in the back pointing toward turbo? then the valve will come out? and the solenoid will stay behind on the pump?

Pavlin Koev :

Full Size Image

Pavlin Koev :

this is correct, remove small nut pointing turbo, pull out solenoid and then unscrew valve

Customer:

ok thnx for your help!!

Pavlin Koev and 7 other Ford Specialists are ready to help you

Related Ford Questions