How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve S Your Own Question
Steve S
Steve S, Ford Technician
Category: Ford
Satisfied Customers: 1866
Experience:  10 years in Ford Dealership, Certified in: Auto Trans, Diesel Engines, Climate Control, Electrical D
Type Your Ford Question Here...
Steve S is online now
A new question is answered every 9 seconds

OBD-II code PO61B, Internal Control Module Torque Calculation

Resolved Question:

OBD-II code PO61B, Internal Control Module Torque Calculation Proformance. Please give repair sugestions, location if this is a sensor, and cost estimate. Thanks. L.Roane
Submitted: 4 years ago.
Category: Ford
Expert:  Steve S replied 4 years ago.
Hello there how does the car run? Thanks steve
Customer: replied 4 years ago.
car idols rough, almost stales at light. sometimes a wrench indicator will appear, and vehicle seems to loose power, or a binding in drivetrain. no check engine light appears when this happens. stopping the vehicle,turn off and restart will correct the lost of power or binding but still idols rough.
Expert:  Steve S replied 4 years ago.
Almost every time I have seen this code and concern it has been because either the air filter box or intake tube is lose or not assembled correctly. this allows unmetered air past the mass air flow sensor and causes this code. seeing that it was in an accident and recently put back together this is where I would start looking. Thanks Steve
Steve S and 3 other Ford Specialists are ready to help you