How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 33046
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

How do I replace my ignition? 1989 F 250

Resolved Question:

How do I replace my ignition? 1989 F 250
Submitted: 4 years ago.
Category: Ford
Expert:  Ron replied 4 years ago.
Hello and Welcome to Justanswer,

My name is XXXXX XXXXX I am here to try and assist your with your question.

Are you replacing the ignition lock and if so does it turn?
Customer: replied 4 years ago.
when I put the key in the key will spin 360 degrees Im not sure totally what i need to replace
Expert:  Ron replied 4 years ago.
That is most likely the lock cylinder, try removing it and having a look at the end of it.

To remove the lock cylinder you will need to remove the steering wheel and unscrew the turn signel switch and pull it up a bit to access the release pin graphic
Ron and 5 other Ford Specialists are ready to help you

Related Ford Questions