How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 35305
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Dose this code at b1676 keep comin on for a abs code an will clear off

This answer was rated:

why dose this code at b1676 keep comin on for a abs code an will clear off
Hello and Welcome to Justanswer,

My name is XXXXX XXXXX I am here to try and assist your with your question.

DTC B1676 is generated when the anti-lock brake control module detects system voltage is less than 9 volts or greater than 19 volts for more than 8 seconds. Which in most cases is caused by a bad anti lock break module but before you replace it you should run the pinpoint test to be sure. I can send it if you need it.
Ron and 8 other Ford Specialists are ready to help you
Customer: replied 5 years ago.
Yes please send the pin point test Thanks
Enclosed is the test you need , Start at test A1.

DOWNLOAD HERE