I have a 2002 Focus that i've repaired. the airbag light blinks once then 3 quick ones. what should I be looking for.
Country: United StatesMake: FordModel: Focus SEYear: 2002Engine: 2.0
replaced right front belt tensioner. Checked all wiring for loose connection
This means that a crash event occured and the crash data memory is full,you will have to replace the restraint control module for this.
Here is what the Ford shop manual states:
Lamp Fault Code (LFC) No DTCs
This signifies the RCM has detected a deployment and at one time had a DTC B1231 that was cleared with a scan tool. The flash code 13 will not clear. Installation of a new RCM is required.
Thanks, Chuck, I'll try that.
Thanks for using Just Answer
The RCM will have to be programmed to the vehicle also
33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance