How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 33028
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Ford F-250 Super Duty FX4 how do i remove the engine fan on

Customer Question

how do i remove the engine fan on a 2008 superduty 6.4
Submitted: 5 years ago.
Category: Ford
Expert:  Ron replied 5 years ago.
Hello and Welcome to Justanswer,

My name is XXXXX XXXXX I am here to try and assist your with your question.

The fan is Left handed threads as you know and if its not coming off , its likely just real tight. Try it again and use a bit more force.

Customer: replied 5 years ago.
i made up a special long wrench and a spud wrench to hold the water pump pulley I welded eyes to pass 3/8 threaded rod between them I cranked them togather which put a lot of pressure on this connection but it didn,t break free. I think I will do this again and apply a LITTLE heat to the joint. BILL.
Expert:  Ron replied 5 years ago.
Yes maybe so, it should come off as long as your going with the LH threads.

Related Ford Questions