How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don Knight Your Own Question
Don Knight
Don Knight, ASE Certified Technician
Category: Ford
Satisfied Customers: 1736
Experience:  Over 40Years experiance with all makes and modles
Type Your Ford Question Here...
Don Knight is online now
A new question is answered every 9 seconds

Change front wheel bearing on a 06 F250 super duty and what tools

Customer Question

How to change front wheel bearing on a 06 F250 super duty and what tools
Submitted: 5 years ago.
Category: Ford
Expert:  Don Knight replied 5 years ago.

Don Knight :

I need to know if your truck is 2 or 4 wheel drive.

JACUSTOMER-9dk8177k- : 2wheel drive
Don Knight :

Remove the tire assembly.Then remove the dust cap on the centerof the hub assembly.remove the caliper assembly.You dont need to remove the caliper from the caliper bracket just the bracket bolts.When you remove the caliper tie it up so it does not hang by the brake hose.Next remove the rotor.Now under the dust cap you will see a nut with a lock washer that is held in place with a cotter pin.Remove the cotter pin and the lock washer,now you can unscrew the nut holding the wheel bearing.Once you get the bearing housing off you will need a punch to remove the rear seal and bearing.Make sure that you greese the new bearings good,and install a new seal.When you put the nut back on dont over tighten it.It should be snug but you will be able to turn the hub assembly by hand with out much force.

Related Ford Questions