Ford Repair Questions? Ask a Mechanic for Answers ASAP
Welcome to Justanswer
2005 engine installed in January into my 2004 Truck.
Ran great from January until May. Then behaved as if I had bad Fuel clogging the system (spitting and dying).
The connectors will only go in one way
No problem. If this was helpful please press ACCEPT. Thanks in advance Danny
I have replaced two fuel injectors, fuel pump, fuel filters, Cam position sensor and crank sensor.
What is the reason for the new PCM
Truck is still showing this poor performance. It died 6 times on my 20 mile commute this morning.
No I don't have a new PCM.
A diesel mechanic I know said to see if I have loose PCM connectors.
I DID all the work the local Ford Dealer service department recommended.
I don't have much confidence in them now.
After paying out $2,500 to get it to run properly.
And it doesn't.
And when 'running" it spits and spurts and tries to die.
Most of the time with these running like this its one of a few things. Bad injectors bad fuel injector control module or restriction in the fuel system needing a filter
So I've done ALL that execpt a FICM.
Based on what your experiencing I would first inspect the PCM connectors then you will want to make sure all of the injectors are working like they should its very possible the FICM is bad
You can get one from www.car-parts.com very reasonably
And the dealer didn;t mention the FICM.