How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 34473
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

1990 ford 7.3 diesel engine.need to remove starter.

Customer Question

1990 ford 7.3 diesel engine.need to remove starter.have two lower bolts removed . what does it take to get the upper bolt that holds the starter in removed?
Submitted: 5 years ago.
Category: Ford
Expert:  Ron replied 5 years ago.
Hello and Welcome to Justanswer,

My name is XXXXX XXXXX I am here to try and assist your with your question.

Its a tight fit but the trick is to come in from the front over the cross member with a long extension and a wobbly socket to access it. YOu need to leave the bottom both in place to hold the starter till you get the top bolt out.
Ron and other Ford Specialists are ready to help you
Customer: replied 5 years ago.
Ron, I got the starter out .thanks to your help I did just as you sugesseted and after much persitiance I got the starter out, Thanks virgil
Expert:  Ron replied 5 years ago.
Your very welcome, there not fun but you did it. Thank you as well.