Hello and Welcome to Justanswer, My name is XXXXX XXXXX X am here to try and assist your with your question
it has a serpentine belt and a automatic adjuster
you do not need to adjust the belt if it is loose then the tensioner needs to be replaced it adjust the belt to proper tension automatically
my escape also has a water pump belt on the port side of the engine
it is also a automatic tensioner you do not need to worry about
There is no tensioner for the water pump belt. the belt goes over one pulley and then the water pump
it is hidden under the plastic cover over the engine
remove the plastic cover over the top of the engine by the radiator
I have pulled that cover and I see no tensioner just the top pulley
this is on the driver's side of the engine
do you need to replace the belt?
yes, it is broken
ok you are right i will send direction on replacing the belt hang on
click here for belt replacement
click on the blue link above
I am going back out to my vehicle to take a look.
did you click on the blue link
yes can you tell me how long the belt is?
dont have the specs but a parts department can get you the right belt
if you do not have any other questions please hit the green accept button thanks