How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kenny Z. Your Own Question
Kenny Z.
Kenny Z., Ford Senior Master Tech
Category: Ford
Satisfied Customers: 5315
Experience:  Auto Trans, Drivability and Electrical Specialist
Type Your Ford Question Here...
Kenny Z. is online now
A new question is answered every 9 seconds

o4 ford expedition. p0306 and p0316.

Customer Question

o4 ford expedition. p0306 and p0316.
Submitted: 5 years ago.
Category: Ford
Expert:  Kenny Z. replied 5 years ago.
Hello and thanks for your question.

I would clear codes and swap the coil and plug with a different cylinder. Drive it until the code comes back. If the code moves to the cylinder you moved the coil and plug to, then replace that coil and plug. If it stays on #6 then double check that the injector is firing. The next step after that would be to check compression. Its usually a coil.
Customer: replied 5 years ago.
installed new coil and spark plug. unit run great. thanks for the help!
Expert:  Kenny Z. replied 5 years ago.
Your welcome. Thanks in advance for the accept!
Expert:  Kenny Z. replied 5 years ago.
Was there something wrong with this answer?