How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ford expert Your Own Question
Ford expert
Ford expert, ASE Certified Technician
Category: Ford
Satisfied Customers: 10370
Experience:  30 yrs,experience shop owner,
22989858
Type Your Ford Question Here...
Ford expert is online now
A new question is answered every 9 seconds

how do you change a fuel pump onan f350 desiel

Resolved Question:

how do you change a fuel pump onan f350 desiel
Submitted: 5 years ago.
Category: Ford
Expert:  Ford expert replied 5 years ago.
Welcome to just answer.com. I'm here to help you and your 100% satisfaction is my goal.This is located on the frame rail under the driver's door and here's the procedure as outlined in the service Manual

Electric Pump

Fuel Line Removal Tool


SPECIAL SERVICE TOOL(S)

REMOVAL

WARNING: SMOKING OR OPEN FLAME OF ANY TYPE MUST NOT BE PRESENT WHEN WORKING NEAR FUEL OR FUEL VAPOR.

CAUTION: The fuel system contains pressurized fuel after the vehicle is shut down and will maintain this pressure for a long period of time.

 

  1. Disconnect both battery ground cables. On vehicles equipped with dual batteries, refer to Battery.
  2. Open the fuel filter/water separator drain valve to release the fuel pressure.
  3. Raise and support the vehicle; refer to Maintenance/Service and Repair.

 

  1. Disconnect the fuel pump harness.
    • Disconnect the fuel pump electrical connector.

NOTE: The electrical connector is located behind the fuel pump near the frame rail.

Fuel Line Disconnect Tool

 

  1. Disconnect the fuel pump supply line.
    • Remove the fuel line retaining clip and discard, then remove the fuel line from the fuel pump.

 

  1. Disconnect the fuel pump delivery line.
1Slide the clip up arid off from the quick connect fitting.
2Insert the fuel line tool.
3Remove the fuel pump delivery line.

 

  1. Unclip the brake lines from the fuel pump bracket.

 

  1. Remove the pump mounting nuts, and the fuel pump.

 

  1. Remove the fuel pump from the mounting bracket.
1Loosen the pinch bolt.
2Spread the mounting bracket.
3Remove the fuel pump.

INSTALLATION

 

  1. Follow the removal procedure in reverse order.

NOTE: On vehicles equipped with dual batteries, refer to Battery for battery reconnect procedure.

Ford expert and 3 other Ford Specialists are ready to help you