How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john -aka eauto Your Own Question
john -aka eauto
john -aka eauto, The Car Guy
Category: Ford
Satisfied Customers: 15038
Experience:  ase tech over 15 years in the field
Type Your Ford Question Here...
john -aka eauto is online now
A new question is answered every 9 seconds

How do you replace the headlight switch for 1992 Ford Ranger

This answer was rated:

How do you replace the headlight switch for 1992 Ford Ranger

Hi I will do my best to answer your question fast and accurate using the info you have provided. Thanks for visiting Just Answer.
john aka eauto

  1. Disconnect battery ground cable, remove ash tray assembly and two finish panel retaining screws, then the finish panel (snaps off).
  2. On Bronco II or Explorer models, remove rear window wash/wipe and heated backlit switch assembly (snaps out).
  3. On Ranger models, remove storage bin (snaps out).
  4. On all models, pull headlamp switch knob to ON position, then depress shaft release button on switch and remove knob and shaft assembly, Fig. 11.
  5. Remove bezel nut, pull switch down through opening, disconnect electrical connector, then remove switch.
  6. Reverse procedure to install.


john -aka eauto and 2 other Ford Specialists are ready to help you