This is the SPI engine correct?
It's the 16V Zetec
ok just seen it was a wagon the Zetec would be rare in a wagon.
Here are the instructions
says so on the valve cover
Remove the splash shield
Remove the accessory drive belt idler pulley
Remove the accessory drive belt tensioner
To install, reverse the removal procedure
We are talking about the one down under the alternator tha is behind the frame,Right?
Yes this is the idler pulley and the tensioner
the last pic is the tensioner
or actually the last 2 are
the 2nd pic is the idler pulley
When you say splash guard are you referring to behind the wheel( like the inner fender?
That is under the vehicle
Ok Thank You