How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask kalamykid Your Own Question
kalamykid
kalamykid, Shop Owner/ Tech
Category: Ford
Satisfied Customers: 3907
Experience:  I HAVE OWNED MY OWN SHOP FOR OVER THREE YEARS. I HAVE THE TOOLS AND SOFTWARE TO ANSWERE ALMOST ANY Q
5629372
Type Your Ford Question Here...
kalamykid is online now
A new question is answered every 9 seconds

How do I replace transmission seal on a 2000, Ford Windstar, 3.8

Customer Question

How do I replace transmission seal on a 2000, Ford Windstar, 3.8
Submitted: 6 years ago.
Category: Ford
Expert:  kalamykid replied 6 years ago.
Which seal are you replacing the front pump seal or the axle seals?
Customer: replied 6 years ago.
The front pump seal
Expert:  kalamykid replied 6 years ago.
There is no easy way to do this. if you have a hanger to hold the engine in place you can drop the sub frame out and drop just the trans. I have a tool called a minipick that I use to hold the engine up so All I have to pull is the trans. If you do not have a fixture that will hold the engine up so all you have to pull is the trans, then you will have to drop the engine and trans out the bottom so you can pull the engine off of the trans. Then you can replace the front seal.