Turn the key from OFF to ON 8 times ( fast ) ending on with the key in the ON position ,,, the power door locks will jump up and down telling you that its ready to accept a remote ,, push any button on your remote and the locks will jump up and down again telling you that it accepted that remote,,, if you have another remote , push a button in it ,, and the locks will jump up and down again .... then turn the key OFF and the locks will jump up and down telling you its out of remote programing mode... and then try your remotes out to see if they work ..
if this does not work ,, then disconect the battery for 5 min and then retry to program the remotes ,, sometimes the system will go into a sleep mode and will not accept remotes and by disconnecting the battery for 5 min it wakes the system up ..
we can go back and forth on this page
We have tried all of the above and still can't get it to reset? Any other suggestions welcome...
07836 712 433