How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Ford Tech -
Category: Ford
Satisfied Customers: 17799
Experience:  18+yrs experience. State Inspector & Ford Diagnostics/Repair
Type Your Ford Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Ford Fusion SEL How do I take the battery out of my 2006 Ford

Resolved Question:

How do I take the battery out of my 2006 Ford Fusion?
Submitted: 5 years ago.
Category: Ford
Expert:  Ron Z. replied 5 years ago.


  • Disconnect the battery.
  • Remove the battery hold down bracket bolt and nut.
  • Remove the battery hold down bracket and J-bolt.
  • Remove the battery heat shield.
  • Remove the battery.
  • To install, reverse the removal procedure.


NOTE: When the battery (or powertrain control module [PCM]) is disconnected and connected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The charging system setpoint may also vary. The vehicle may need to be driven to relearn its strategy.

Ron Z. and 6 other Ford Specialists are ready to help you

Related Ford Questions