How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, Ford Technician
Category: Ford
Satisfied Customers: 576
Experience:  Ford Senior Certified. 20 years experience. Certified training in: driveability, electronics, etc.
50706092
Type Your Ford Question Here...
Marty is online now
A new question is answered every 9 seconds

4r100 year 2000 and am looking for a diagram for check ball placement

Customer Question

I have a 4R100 year 2000 and am looking for a diagram for check ball placement for lower
valve body there are 3 check balls in this body
Submitted: 6 years ago.
Category: Ford
Expert:  Marty replied 6 years ago.

Marty :

Allow me to help in diagnosing your vehicle! If I helped make sure to hit the accept button so I can get credited. Here you go




  1. NOTE: Apply a small amount of petroleum jelly to each check ball prior to positioning them on the valve body separator plate.


    Install eight rubber and one steel EPC check balls.

    [IMAGE][SRC][/SRC][ALT][/ALT][WIDTH]72.54464285714286[/WIDTH][HEIGHT]100[/HEIGHT][STYLE][/STYLE][/IMAGE]




















































    ItemPart NumberDescription
    1EPC steel check ball
    2CB6Check ball
    3BS1Ball shuttle
    4CB9Check ball
    5CB14Check ball
    6CB1Check ball
    7BS3Ball shuttle
    8CB8Check ball
    9CB7Check ball




  1. NOTE: Apply petroleum jelly to the EPC check ball spring prior to installing it into the case.


    Install the EPC check ball spring.

Marty :

Here is the picture to go with it

Full Size Image