How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch, Ford Cert.
Category: Ford
Satisfied Customers: 20432
Experience:  Ford Cert., Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Ford Question Here...
Lurch is online now
A new question is answered every 9 seconds

Ford F-150 XLT how to disable alarm

Resolved Question:

how to disable alarm
Submitted: 5 years ago.
Category: Ford
Expert:  Lurch replied 5 years ago.


Sounds like Aftermarket & Brand & Model Number is XXXXX


Typically the Valet Switch works like this


Turn Key On
Press & hold Valet Button until the LED goes Out or stays On solid

Turn Key off


If the LED is blinking, that means the Alarm is still functional




Please take a moment to click ACCEPT as this is how I receive credit.

Your Deposit is not Payment.
You need to click ACCEPT so I may be compensated a small portion.

Regardless of the terms of your Just Answer account, I only get paid for my answer and effort by your accept

Lurch and 3 other Ford Specialists are ready to help you
Customer: replied 5 years ago.
I just tried your advice - However the LED is off when I enter the truck - so I am unable to see any change. I did hear a "tone" after pushing in the valet button so I turned the truck to off. I exited the truck - locked it by pushing down the button - after 30 seconds the LED began blinking again?
Expert:  Lurch replied 5 years ago.


Thanks for the update.............


As stated above, if Aftermarket, Brand & Model Number is XXXXX


There are so many different ways to switch to Valet
I just gave you the most common


If this is Factory Ford, let me know



Customer: replied 5 years ago.
Yes - It is factory Ford and they once told me how to do this - it worked - but I have forgotten the steps. I have no idea how to locate brand and model number - on my original wiondow sticker it just says "remote keyless entry"
Expert:  Lurch replied 5 years ago.


This has to be Dealer Installed or Aftermarket, as the Factory Alarm / Keyless Entry does not permit you to Disable the Alarm & only use Keyless Entry


Will need Brand & Model number to help further
You may want to contact the Dealer again if you need info right away


Will OPT OUT & relist this question again
Perhaps someone else can help without the info............


If Refund is needed, please contact Service in the HELP section on your page


do not respond to this as it will lock question





Customer: replied 5 years ago.

What I have in my owners manual is referd too as "SecuriLock - Passive Anti-Theft System"

Expert:  Lurch replied 5 years ago.


As stated there are many different methods & types
Here is Ford SecuriLock
The switch under dash is for Programming\\


See if this works


To engage the Valet mode, turn the ignition key to the ON or RUN position and

press the Lock & Unlock buttons together on the remote control transmitter.

The system will begin flashing the dash mounted status indicator in a double-flash

pattern indicating that the system is in Service mode.

To return the system to its normal operating mode, turn the ignition key to the ON or RUN position and press the and buttons on the PowerCode remote control

transmitter again. The status indicator will shut off, indicating that the system is in now

in its normal operating mode.

Important Note: When taking your vehicle in for service it recommended that you

inform the service personnel that your vehicle is equipped with a remote control start