How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, ASE Certified Technician
Category: Ford
Satisfied Customers: 15312
Experience:  12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.
Type Your Ford Question Here...
Richard is online now
A new question is answered every 9 seconds

Pulled codes P0171 and P0174 on 1997 Ford Crown Victoria with

Customer Question

Pulled codes P0171 and P0174 on 1997 Ford Crown Victoria with 4.6 liter VIN W. Changed MAF sensor and cleared codes. Completed drive cycle, check engine light did not come back on. Once vehicle is at normal operating temp and you stop at stop sign, it will stall. Vehicle will start again with no problem and idle fine. Vehicle has no power loss or hesitation.
Submitted: 6 years ago via AllDataDIY.
Category: Ford
Expert:  Richard replied 6 years ago.
Chat Conversation Started
Richard :

Hello and welcome to

Richard :

You may have a problem with a vacuum leak, EGR sticking open or a stickign idle air control valve.

Richard :

They will all cause the stalling like you describe and a vacuum leak could be the cause of those leans codes.

Richard :

Look closely at the PCV hose as they sometimes collapse and leak.

Related Ford Questions