How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 33452
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

what is the front wheel bearing nut torque spec for a 1998

Resolved Question:

what is the front wheel bearing nut torque spec for a 1998 mustang gt 4.6L ?
Submitted: 6 years ago.
Category: Ford
Expert:  Ron replied 6 years ago.
Chat Conversation Started
Ron :

Hello and Welcome to Justanswer,

My name is XXXXX XXXXX I am here to try and assist your with your question.

Ron :

The wheel bearing are service as the hub assenbly.




  1. Since the front wheel bearing cannot be adjusted, the front axle Hub retainer and washer must not be backed off after reaching the required torque of 300-400 Nm (221-295 ft. lbs.) during installation.

  2. The front axle hub retainer must be replaced with a new front axle wheel hub retainer whenever the front axle wheel hub retainer is backed off or removed. Never reuse the front axle wheel hub retainer.

  3. Impact-type tools must not be used to tighten the front axle wheel hub retainer or bearing damage will result.


 

Ron and 3 other Ford Specialists are ready to help you

Related Ford Questions