Hi, Thank you for asking your question on JustAnswer, my name is XXXXX XXXXX I will be assisting you today with your question.
In order to replace the rear main you will have to remove the transmission in order to gain access to the seal, I can send replacement instructions if you need,
Yes I would need replacement instructions, Thanks
Ok no problem CLICK HERE FOR REAR MAIN SEAL REPLACEMENT INSTRUCTIONS
Do you need more help?
If not then PLEASE don't forget to click on the ACCEPT button so that I may get credit for my work, thanks.
So this is not the one where I will need to drop the oil pan? The seal is one piece and not two?
Yes that is correct, the seal is a one piece design
One more question, drop the tranny, and its against the engine block right there?
Yes, on the back side of the engine, behind the flywheel
ok, thanks. I just dropped the oil pan and replaced the gaskets and it started leaking more. I thought it was the oil pan gasket which it was as far as I could tell. Now that its back together it started leaking really bad. I wasn't sure if it was worth the efford of dropping the tranny. But that seems simple enought. I was finding info about dropping oil pan and back of crankshaft because of two pieces etc. Thanks, XXXXX XXXXX accept now.
Thank you very much!