How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Shawn Your Own Question
Shawn, Auto Service Technician
Category: Ford
Satisfied Customers: 3756
Experience:  16 years experience Ford,Nissan and Honda dealership in all areas
Type Your Ford Question Here...
Shawn is online now
A new question is answered every 9 seconds

2000 ford ranger: auto trans..shift..I get step by step instructions

Customer Question

I have a 2000 ford ranger w/auto trans. The shift indcator just lays to the right and dosn't move. Where can I get step by step instructions to fix it?
Submitted: 6 years ago.
Category: Ford
Expert:  Shawn replied 6 years ago.
Chat Conversation Started
Shawn :

Hi, Thank you for asking your question on JustAnswer, my name is XXXXX XXXXX I will be assisting you today with your question.


Yes, I asked for insructions?

Shawn :

Most likely cause of the problem you are having is a loose Transmission control indicator linkage.

Shawn :

  • Transmission Range Indicator Does Not Correspond to the Gear

  • Transmission shift cable bracket.

  • TIGHTEN bolts holding transmission shift cable bracket.

  • Transmission control indicator linkage.

  • ADJUST PRNDL at the steering housing.

  • Transmission shift cable loose from the transmission retainer bracket.

  • REINSTALL transmission shift cable into bracket. REPLACE cable if damaged.

  • Shift linkage.

  • Transmission shift cable loose from the column bracket.

  • Column shift cable bracket.

  • VERIFY the transmission shift cable adjustment. ADJUST the transmission shift cable if necessary. VERIFY digital transmission range (DTR) sensor for proper adjustment. REFER to Section 307-01A(4R44E transmission) or (5R55E transmission).

  • Clip securing the transmission shift cable to the shift control selector lever.

  • INSTALL the clip properly.

  • Internal transmission damage.

  • REFER to Section 30701a(4R44E transmission) or Section 307-01B(5R55E transmission).


so instructions?

Shawn :

Yes please be patient I will get them for you, thanks.





Shawn :

Yes Click on the link which includes instructions with diagrams (CLICK HERE).

Shawn :

Please keep in mind JustAnswer is based on an honor system, if the informatio I have sent you was helpful, thenplaes click on the ACCEPT button, so that I may get credit for my work, thanks.

Related Ford Questions