How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask TIM THE TECH Your Own Question
TIM THE TECH
TIM THE TECH, Ford Technician
Category: Ford
Satisfied Customers: 306
Experience:  18 Years Experience Master tech
17176133
Type Your Ford Question Here...
TIM THE TECH is online now
A new question is answered every 9 seconds

1998 Ford Ranger: high idle..iac Valve..trouble code..same problem

This answer was rated:

I have a problem with a high idle on a 1998 Ford Ranger 3.0 Liter. I have replaced the IAC Valve it keeping shooting trouble code iac overspeed. Im tired of dumping cash into the same problem please help
Is this a manual trans?
Customer: replied 6 years ago.

yes its a manual 4x4

There is a calibration update that the dealer needs to do for your concern heres the info click here
Customer: replied 6 years ago.
Ive had it recalibrated and still high idle. Forgot about that one
TIM THE TECH and 6 other Ford Specialists are ready to help you
Customer: replied 6 years ago.

I clicked on your link and its just a blank page

I just tried it again works for me it a pdf file?

Customer: replied 6 years ago.
Mine says pdf file is damaged and can not be repaired
Customer: replied 6 years ago.
So in other word its going to cost me an arm and a leg to have a dealer run sytem checks
Shouldn't cost that much.