How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chuck Your Own Question
Chuck
Chuck, ASE Certified Technician
Category: Ford
Satisfied Customers: 2100
Experience:  33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance
17659378
Type Your Ford Question Here...
Chuck is online now
A new question is answered every 9 seconds

How to remove passenger side airbag?

Here are your instructions for removing the passenger airbag.

 

 

graphic
View Full Image

 

 

 

ItemPart NumberDescription
1W706599Passenger air bag module bolts (3 required)
2046B62RH defrost grille
3044A74Passenger air bag module

 

 

 

1. Depower the system

 

2. While pushing in on the 2 glove compartment door tabs, position the glove compartment downward

 

 

graphic
View Full Image

 

 

3. Remove the passenger air bag module bolts.

4. Remove the RH defrost grille

5. Remove the 2 push pins retaining the passenger air bag module deployment door to the instrument panel (if equipped).

6. NOTICE: Do not handle the passenger air bag module by grabbing the edges of the deployment door.

  • Reaching one hand into the glove box opening, push out on the front of the passenger air bag module, releasing the clips at the front of the bag and partially remove the passenger air bag module from the instrument panel.

 

 

graphic
View Full Image

 

 

7. Disconnect the passenger air bag module electrical connectors

 

 

 

graphic
View Full Image

 

 

Installation

  1. Connect the passenger air bag module electrical connectors.
  2. NOTE: Make sure the J-clips are in place before positioning the passenger air bag module to the instrument panel.
  3. Position the passenger air bag module into the instrument panel.
    1. Angle the rear of the passenger air bag module deployment door so the tabs engage to the instrument panel.
    2. Position the passenger air bag module into place and push down on the deployment door, engaging the remaining tabs

 

graphic
View Full Image

 

 

3. Install the RH defrost grille.

4. Install the 2 pushpins retaining the passenger air bag module deployment door to the instrument panel (if equipped).

5. Install the passenger air bag module bolts.

 

  • To install, tighten to 9 Nm (80 lb-in).

6. Close the glove compartment

7. Repower the system

Read full interaction below »

Resolved Question:

How do I remove my passenger side airbag on an F150?

Submitted: 6 years ago.
Category: Ford
Expert:  Chuck replied 6 years ago.

Here are your instructions for removing the passenger airbag.

graphic

ItemPart NumberDescription
1W706599Passenger air bag module bolts (3 required)
2046B62RH defrost grille
3044A74Passenger air bag module

1. Depower the system

2. While pushing in on the 2 glove compartment door tabs, position the glove compartment downward

graphic

3. Remove the passenger air bag module bolts.

4. Remove the RH defrost grille

5. Remove the 2 push pins retaining the passenger air bag module deployment door to the instrument panel (if equipped).

6. NOTICE: Do not handle the passenger air bag module by grabbing the edges of the deployment door.

  • Reaching one hand into the glove box opening, push out on the front of the passenger air bag module, releasing the clips at the front of the bag and partially remove the passenger air bag module from the instrument panel.
  • graphic

    7. Disconnect the passenger air bag module electrical connectors

    graphic

    Installation

    1. Connect the passenger air bag module electrical connectors.
    2. NOTE: Make sure the J-clips are in place before positioning the passenger air bag module to the instrument panel.
    3. Position the passenger air bag module into the instrument panel.
      1. Angle the rear of the passenger air bag module deployment door so the tabs engage to the instrument panel.
      2. Position the passenger air bag module into place and push down on the deployment door, engaging the remaining tabs

    graphic

    3. Install the RH defrost grille.

    4. Install the 2 pushpins retaining the passenger air bag module deployment door to the instrument panel (if equipped).

    5. Install the passenger air bag module bolts.

  • To install, tighten to 9 Nm (80 lb-in).
  • 6. Close the glove compartment

    7. Repower the system

    Chuck and other Ford Specialists are ready to help you