How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Tim Your Own Question

Tim
Tim, Ford Technician
Category: Ford
Satisfied Customers: 3580
Experience:  Ford Senior Master tech, ASE certified
Type Your Ford Question Here...
Tim is online now
A new question is answered every 9 seconds

where is the turbine speed sensor location on a 1998 ford

Resolved Question:

where is the turbine speed sensor location on a 1998 ford explorer
Submitted: 4 years ago.
Category: Ford
Expert:  Tim replied 4 years ago.

Turbine Shaft Speed (TSS) Sensor

The turbine shaft speed (TSS) sensor is a magnetic pickup that sends the powertrain control module (PCM) torque converter turbine speed information.

The TSS sensor is mounted internally on the center support.

The PCM uses TSS information to help determine electronic pressure control (EPC) and torque converter clutch (TCC) operation.

 

You have to remove and disassemble the trans down to the center support to access.

Customer: replied 4 years ago.
can i get a transmission diagram
Expert:  Tim replied 4 years ago.

graphic

 

 

graphic

 

ItemPart NumberDescription
17902Converter Assembly - (Contains Piston Type Clutch)
2379299-S2Nut - (Att. Converter Assembly to Flex Plate) (4 Req'd)
37017Shaft - Input
47A248Seal Assembly - Converter Hub to Converter Housing (Also in Converter Housing Assembly)
5E804595Screw and Seal Assembly - M10 x 33 (Att. Converter Housing to Case) (8 Req'd)
67976Converter Housing
77B472Plate - Fluid Pump Adapter
87A136Converter Housing-to-Case Gasket
97L323Seal Ring - Fluid Pump Support
10W701431-S300O-ring - Fluid Pump Shaft to Inner Gear (Also in Pump Assembly)
117A103Fluid Pump Assembly
127D014Washer - Fluid Pump Input Thrust (Select Fit) No. 1
13W701429-S309MScrew, Fluid Pump-to-Converter Housing (6 Req'd)
147A248Seal Ring - Fluid Pump
15E825100-S100Nut and Seal Assembly - Hex Intermediate and Front Band Adjustment/Lock (2 Req'd)
167C492Screw - Intermediate and Front Band Adjuster/Lock (2 Req'd)
177D430Strut - Intermediate and Front Band Anchor (2 Req'd)
187A653Bracket - Front Band Lever to Case (Model Dependent)
197D433Shaft - Front Band Actuating Lever
207330Lever - Intermediate and Front Band Servo (2 Req'd)
217D029Strut - Intermediate and Front Band Apply (2 Req'd)
227D034Band Assembly - Intermediate and Front (2 Req'd)
237L669Drum Assembly - Front Brake and Coast Clutch
247D404Seal Ring - Coast Clutch and Direct Clutch Piston - Inner (2 Req'd)
257A548Seal Ring - Coast Clutch Piston - Outer
267A262Piston - Coast Clutch
277A480Spring - Coast and Direct Clutch Piston (40 Req'd)
287A527Retainer - Coast and Direct Clutch Piston Springs (2 Req'd)
29E860125-SRetaining Ring, 63 mm - Coast and Direct Clutch Piston
307B442Plate - Coast (2 Req'd) and Direct (4 or 5 Req'd) Clutch External Steel
317B164Plate - Coast (2 Req'd) and Direct (4 or 5 Req'd) Clutch Internal Friction
327B066Plate - Coast and Direct Clutch Pressure (2 Req'd)
33E860126S/129SRetaining Ring - Coast and Direct Clutch Plates (Select Fit) (2 Req'd)
347660Adapter - Coast Clutch to Front Carrier
357D063Gear - Sun Overdrive
367B446Carrier - Planetary Gear Front (With Trigger Wheel)
377L495Bearing - Front Planet Thrust No. 2
387653Gear - Overdrive Ring
397A658Shaft - Center Overdrive Ring (Includes Front Overrunning Clutch 7C109)
40W702037-S300Retaining Ring - Center Shaft in Front Ring Gear
41W702465-S300Retaining Ring - Center Support in Case
427M153Bearing - Center Shaft Thrust No. 3, No. 5 and No. 9 (3 Req'd)
43E826160-S76Nut and Cage Assembly - (Att. Center Support to Case)
44E804373-SScrew Cap (Att. Center Support to Case)
457M101Sensor - Turbine Shaft Speed (TSS)
46W702297-S300Screw - Turbine Shaft Speed Sensor
477A130Support - Center
487D014Bearing - Intermediate Brake Drum Thrust (Select Fit) No. 4
497D433Shaft - Intermediate Band Actuating Lever
507D044Drum - Intermediate Brake and Direct Clutch (Not Available Separately)
517A548Seal Ring - Direct Clutch Piston Inner
527A262Piston - Direct Clutch
537A527Retainer - Direct Clutch Piston Spring
547A360Cylinder - Forward Clutch
557A548Seal Ring - Forward Clutch Piston Inner
567A548Seal Ring - Forward Clutch Piston Outer
577A262Piston - Forward Clutch
587A480Spring - Forward Clutch Piston (15 Req'd)
597A527Retainer - Forward Clutch Piston Spring
60E860109-SRetaining Ring - Forward Clutch Piston and Spring in Forward Clutch Cylinder
617B070Spring - Forward Clutch Cushion
627B442Plate - Forward Clutch External Steel (6 Req'd)
637B164Plate - Forward Clutch Internal Friction (6 Req'd)
647B066Plate - Forward Clutch Pressure
65E860115S/118SRetaining Ring - Forward Clutch Plates in Forward Clutch Cylinder (Select Fit)
667D234Bearing - Forward Ring Gear Hub Thrust No. 6A
677D090Washer - Forward Clutch Thrust No. 6B
68E860122-SRetaining Ring - Forward and Output Shaft Ring Gears to Hubs (2 Req'd)
697B067Hub - Forward Ring Gear
707D392Gear - Forward Ring (72 External Teeth and 57 Internal Teeth)
717F374Bearing - Forward Planet Thrust No. 7
727A398Planetary - Forward (6 Pinion) (Not Available Separately)
73E860121-SRetaining Ring 39 mm - Input Shell to Sun Gear Assembly (2 Req'd)
747D063Gear - Sun (Forward)
757D064Shell - Input
767M151Bearing - Low/Reverse Planet Carrier Thrust No. 8
77W702037-S300Snap Ring
787D006Planet - Low/Reverse (6 Pinion)
797B176Sleeve - Output
807A153Gear - Output Shaft Ring
81E860527-SRetaining Ring 25 x 2 mm - Output Shaft in Case
827D164Hub - Output Shaft
837C498Drum - Low/Reverse Brake (Includes Overrunning Clutch)
847D095Band - Low/Reverse
857M150Bearing Race (2 Pieces) - Output Shaft Hub Thrust No. 10A
867M150Bearing - Output Shaft Hub Thrust No. 10B
877R205Bearing - Output Shaft to Case (Part of Case Assembly)
887B368Washer - Output Shaft Thrust No. 11
897M167Gear - Transmission Parking
907060Shaft - Output (4x2)
917086Gasket - Extension Housing
927A441Pawl - Parking
937D070Spring - Parking Pawl Return
947D071Shaft - Parking Pawl
957A039Extension Housing (4x2)
967A034Bushing - Extension Housing (4x2)
977052Seal - Extension Housing to Slip Yoke
98E804137-S72Stud - Extension Housing
99E800152-S72Screw - Extension Housing (5 Req'd)
1007060Shaft - Output (4x4)
1017A039Extension Housing (4x4)
102N605804-S100Screw - Extension Housing to Transfer Case (5 Req'd)
103W701271-S309Nut - Att. Outer and Inner Manual Valves to Shaft (2 Req'd)
1047A256Lever - Manual Control Outer
105N806933-S100Screw - Digital Transmission Range (TR) Sensor (2 Req'd)
1067F293Sensor - Digital Transmission Range (TR)
1077A308Shaft - Manual Valve Outer to Inner Lever
108E840125-SPin - Spring (Retains Outer Manual Lever to Case)
1097B498Seal - Main Control Lever
1107A115Lever - Manual Valve Inner
1117A232Rod - Parking Pawl Actuating
1127E332Spring Assembly - Manual Valve Detent
113E800185-SScrew Detent Spring
1147Z409Connector - Transmission Case (16-Pin With Wire Harness to 6 Solenoids)
115W703015-S300O-ring - Transmission Case (16-Pin) Connector
1167005Case Assembly (Not Available Separately)
117W702981-S300Speed Sensors (2 Req'd)
118W702297-S300Screw - ODS and OSS Sensor
11984280020Spring - Transmission Case (16-Pin) Connector
1207H103Sensor - Output Shaft Speed (OSS)
121E450102-S80Plug - Pipe Line and EPC Pressure (Part of Case Assembly) (2 Req'd) (Model Dependent)
1227034Vent - (4x4)
1237034Vent - (4x2)
124E804533-S201Stud - Att. Heat Shield to Case (4x4)
1257F103Shield - Transmission Heat
126N620040-S36Nut - Transmission Heat Shield
1277A160Tube - Lube Fluid Inlet - Short
1287D273Connector - Fluid Tube (2 Req'd)
1297D028Spring - Intermediate Servo Piston (2 Req'd)
1307D021Piston and Rod - Intermediate and Front Servo (2 Req'd)
1317D027Cover and Seal - Intermediate and Front Servo (2 Req'd)
1327D040O-ring - Intermediate and Front Servo (2 Req'd)
133E860343-SRetaining Ring - 67 x 1.5mm Intermediate and Front Servo (2 Req'd)
134E804357-S76Screw - Att. Separating Plate to Main Control
1357G383Solenoid - Electronic Pressure Control (EPC)
1367G484Solenoid - Transmission Shift (SS) (4 Req'd)
137W702949-S300O-ring - Shift Solenoid Small (13x1.5) (4 Req'd)
138W702951-S300O-ring - Shift Solenoid Large (15x1.5) (4 Req'd)
1397G136Solenoid - Torque Converter Clutch (TCC)
1407L491Clamp - (SSA/SS1 and SSC/SS3) Solenoids
1417L491Clamp - TCC/SSD/SS4/SSB/SS2 and EPC Solenoids (Model Dependent)
142E800155-SScrew - Clamp (2 Req'd)
1437C155Gasket - Control Valve Body to Case
1447A008Plate - Valve Body Separating (Not Available Separately)
1457D100Gasket - Control Valve Body Separating
1467A100Control Valve Body - Main (Not Available Separately)
147E800154-SScrew - Main Control Valve Body (4 Req'd)
148E800153-SScrew - Main Control Valve Body (16 Req'd)
149E800163-SScrew - Main Control Valve Body (3 Req'd)
1507423Seal Ring - Low/Reverse Servo Piston Small
1517423Seal Ring - Low/Reverse Servo Piston Large
1527D189Piston - Low/Reverse Band Servo (Select Fit)
1537L173Gasket - Low/Reverse Servo Cover
1547D036Cover - Low/Reverse Servo
155E800156-SScrew - Low/Reverse Servo Cover (4 Req'd)
156E853163-SO-ring - Fluid Filter Small
1577A098Filter - Fluid Pan (4x2)
158E853164-SO-ring - Fluid Filter Large
1597E290Magnet
1607A191Gasket - Fluid Pan
161W701203-S309MScrew - Transmission Fluid Pan (18 Req'd)
1627A194Pan - Transmission Fluid (4x2)
1637A098Filter - Transmission Fluid Pan (4x4)
1647A194Pan - Transmission Fluid (4x4)
165E800329-SScrew - Fluid Filter
A-Coast Clutch Assembly
B-Direct Clutch Assembly
C-Forward Clutch Assembly

Expert:  Tim replied 4 years ago.

graphic

 

 

graphic

 

ItemPart NumberDescription
17902Converter Assembly - (Contains Piston Type Clutch)
2379299-S2Nut - (Att. Converter Assembly to Flex Plate) (4 Req'd)
37017Shaft - Input
47A248Seal Assembly - Converter Hub to Converter Housing (Also in Converter Housing Assembly)
5E804595Screw and Seal Assembly - M10 x 33 (Att. Converter Housing to Case) (8 Req'd)
67976Converter Housing
77B472Plate - Fluid Pump Adapter
87A136Converter Housing-to-Case Gasket
97L323Seal Ring - Fluid Pump Support
10W701431-S300O-ring - Fluid Pump Shaft to Inner Gear (Also in Pump Assembly)
117A103Fluid Pump Assembly
127D014Washer - Fluid Pump Input Thrust (Select Fit) No. 1
13W701429-S309MScrew, Fluid Pump-to-Converter Housing (6 Req'd)
147A248Seal Ring - Fluid Pump
15E825100-S100Nut and Seal Assembly - Hex Intermediate and Front Band Adjustment/Lock (2 Req'd)
167C492Screw - Intermediate and Front Band Adjuster/Lock (2 Req'd)
177D430Strut - Intermediate and Front Band Anchor (2 Req'd)
187A653Bracket - Front Band Lever to Case (Model Dependent)
197D433Shaft - Front Band Actuating Lever
207330Lever - Intermediate and Front Band Servo (2 Req'd)
217D029Strut - Intermediate and Front Band Apply (2 Req'd)
227D034Band Assembly - Intermediate and Front (2 Req'd)
237L669Drum Assembly - Front Brake and Coast Clutch
247D404Seal Ring - Coast Clutch and Direct Clutch Piston - Inner (2 Req'd)
257A548Seal Ring - Coast Clutch Piston - Outer
267A262Piston - Coast Clutch
277A480Spring - Coast and Direct Clutch Piston (40 Req'd)
287A527Retainer - Coast and Direct Clutch Piston Springs (2 Req'd)
29E860125-SRetaining Ring, 63 mm - Coast and Direct Clutch Piston
307B442Plate - Coast (2 Req'd) and Direct (4 or 5 Req'd) Clutch External Steel
317B164Plate - Coast (2 Req'd) and Direct (4 or 5 Req'd) Clutch Internal Friction
327B066Plate - Coast and Direct Clutch Pressure (2 Req'd)
33E860126S/129SRetaining Ring - Coast and Direct Clutch Plates (Select Fit) (2 Req'd)
347660Adapter - Coast Clutch to Front Carrier
357D063Gear - Sun Overdrive
367B446Carrier - Planetary Gear Front (With Trigger Wheel)
377L495Bearing - Front Planet Thrust No. 2
387653Gear - Overdrive Ring
397A658Shaft - Center Overdrive Ring (Includes Front Overrunning Clutch 7C109)
40W702037-S300Retaining Ring - Center Shaft in Front Ring Gear
41W702465-S300Retaining Ring - Center Support in Case
427M153Bearing - Center Shaft Thrust No. 3, No. 5 and No. 9 (3 Req'd)
43E826160-S76Nut and Cage Assembly - (Att. Center Support to Case)
44E804373-SScrew Cap (Att. Center Support to Case)
457M101Sensor - Turbine Shaft Speed (TSS)
46W702297-S300Screw - Turbine Shaft Speed Sensor
477A130Support - Center
487D014Bearing - Intermediate Brake Drum Thrust (Select Fit) No. 4
497D433Shaft - Intermediate Band Actuating Lever
507D044Drum - Intermediate Brake and Direct Clutch (Not Available Separately)
517A548Seal Ring - Direct Clutch Piston Inner
527A262Piston - Direct Clutch
537A527Retainer - Direct Clutch Piston Spring
547A360Cylinder - Forward Clutch
557A548Seal Ring - Forward Clutch Piston Inner
567A548Seal Ring - Forward Clutch Piston Outer
577A262Piston - Forward Clutch
587A480Spring - Forward Clutch Piston (15 Req'd)
597A527Retainer - Forward Clutch Piston Spring
60E860109-SRetaining Ring - Forward Clutch Piston and Spring in Forward Clutch Cylinder
617B070Spring - Forward Clutch Cushion
627B442Plate - Forward Clutch External Steel (6 Req'd)
637B164Plate - Forward Clutch Internal Friction (6 Req'd)
647B066Plate - Forward Clutch Pressure
65E860115S/118SRetaining Ring - Forward Clutch Plates in Forward Clutch Cylinder (Select Fit)
667D234Bearing - Forward Ring Gear Hub Thrust No. 6A
677D090Washer - Forward Clutch Thrust No. 6B
68E860122-SRetaining Ring - Forward and Output Shaft Ring Gears to Hubs (2 Req'd)
697B067Hub - Forward Ring Gear
707D392Gear - Forward Ring (72 External Teeth and 57 Internal Teeth)
717F374Bearing - Forward Planet Thrust No. 7
727A398Planetary - Forward (6 Pinion) (Not Available Separately)
73E860121-SRetaining Ring 39 mm - Input Shell to Sun Gear Assembly (2 Req'd)
747D063Gear - Sun (Forward)
757D064Shell - Input
767M151Bearing - Low/Reverse Planet Carrier Thrust No. 8
77W702037-S300Snap Ring
787D006Planet - Low/Reverse (6 Pinion)
797B176Sleeve - Output
807A153Gear - Output Shaft Ring
81E860527-SRetaining Ring 25 x 2 mm - Output Shaft in Case
827D164Hub - Output Shaft
837C498Drum - Low/Reverse Brake (Includes Overrunning Clutch)
847D095Band - Low/Reverse
857M150Bearing Race (2 Pieces) - Output Shaft Hub Thrust No. 10A
867M150Bearing - Output Shaft Hub Thrust No. 10B
877R205Bearing - Output Shaft to Case (Part of Case Assembly)
887B368Washer - Output Shaft Thrust No. 11
897M167Gear - Transmission Parking
907060Shaft - Output (4x2)
917086Gasket - Extension Housing
927A441Pawl - Parking
937D070Spring - Parking Pawl Return
947D071Shaft - Parking Pawl
957A039Extension Housing (4x2)
967A034Bushing - Extension Housing (4x2)
977052Seal - Extension Housing to Slip Yoke
98E804137-S72Stud - Extension Housing
99E800152-S72Screw - Extension Housing (5 Req'd)
1007060Shaft - Output (4x4)
1017A039Extension Housing (4x4)
102N605804-S100Screw - Extension Housing to Transfer Case (5 Req'd)
103W701271-S309Nut - Att. Outer and Inner Manual Valves to Shaft (2 Req'd)
1047A256Lever - Manual Control Outer
105N806933-S100Screw - Digital Transmission Range (TR) Sensor (2 Req'd)
1067F293Sensor - Digital Transmission Range (TR)
1077A308Shaft - Manual Valve Outer to Inner Lever
108E840125-SPin - Spring (Retains Outer Manual Lever to Case)
1097B498Seal - Main Control Lever
1107A115Lever - Manual Valve Inner
1117A232Rod - Parking Pawl Actuating
1127E332Spring Assembly - Manual Valve Detent
113E800185-SScrew Detent Spring
1147Z409Connector - Transmission Case (16-Pin With Wire Harness to 6 Solenoids)
115W703015-S300O-ring - Transmission Case (16-Pin) Connector
1167005Case Assembly (Not Available Separately)
117W702981-S300Speed Sensors (2 Req'd)
118W702297-S300Screw - ODS and OSS Sensor
11984280020Spring - Transmission Case (16-Pin) Connector
1207H103Sensor - Output Shaft Speed (OSS)
121E450102-S80Plug - Pipe Line and EPC Pressure (Part of Case Assembly) (2 Req'd) (Model Dependent)
1227034Vent - (4x4)
1237034Vent - (4x2)
124E804533-S201Stud - Att. Heat Shield to Case (4x4)
1257F103Shield - Transmission Heat
126N620040-S36Nut - Transmission Heat Shield
1277A160Tube - Lube Fluid Inlet - Short
1287D273Connector - Fluid Tube (2 Req'd)
1297D028Spring - Intermediate Servo Piston (2 Req'd)
1307D021Piston and Rod - Intermediate and Front Servo (2 Req'd)
1317D027Cover and Seal - Intermediate and Front Servo (2 Req'd)
1327D040O-ring - Intermediate and Front Servo (2 Req'd)
133E860343-SRetaining Ring - 67 x 1.5mm Intermediate and Front Servo (2 Req'd)
134E804357-S76Screw - Att. Separating Plate to Main Control
1357G383Solenoid - Electronic Pressure Control (EPC)
1367G484Solenoid - Transmission Shift (SS) (4 Req'd)
137W702949-S300O-ring - Shift Solenoid Small (13x1.5) (4 Req'd)
138W702951-S300O-ring - Shift Solenoid Large (15x1.5) (4 Req'd)
1397G136Solenoid - Torque Converter Clutch (TCC)
1407L491Clamp - (SSA/SS1 and SSC/SS3) Solenoids
1417L491Clamp - TCC/SSD/SS4/SSB/SS2 and EPC Solenoids (Model Dependent)
142E800155-SScrew - Clamp (2 Req'd)
1437C155Gasket - Control Valve Body to Case
1447A008Plate - Valve Body Separating (Not Available Separately)
1457D100Gasket - Control Valve Body Separating
1467A100Control Valve Body - Main (Not Available Separately)
147E800154-SScrew - Main Control Valve Body (4 Req'd)
148E800153-SScrew - Main Control Valve Body (16 Req'd)
149E800163-SScrew - Main Control Valve Body (3 Req'd)
1507423Seal Ring - Low/Reverse Servo Piston Small
1517423Seal Ring - Low/Reverse Servo Piston Large
1527D189Piston - Low/Reverse Band Servo (Select Fit)
1537L173Gasket - Low/Reverse Servo Cover
1547D036Cover - Low/Reverse Servo
155E800156-SScrew - Low/Reverse Servo Cover (4 Req'd)
156E853163-SO-ring - Fluid Filter Small
1577A098Filter - Fluid Pan (4x2)
158E853164-SO-ring - Fluid Filter Large
1597E290Magnet
1607A191Gasket - Fluid Pan
161W701203-S309MScrew - Transmission Fluid Pan (18 Req'd)
1627A194Pan - Transmission Fluid (4x2)
1637A098Filter - Transmission Fluid Pan (4x4)
1647A194Pan - Transmission Fluid (4x4)
165E800329-SScrew - Fluid Filter
A-Coast Clutch Assembly
B-Direct Clutch Assembly
C-Forward Clutch Assembly

Tim, Ford Technician
Category: Ford
Satisfied Customers: 3580
Experience: Ford Senior Master tech, ASE certified
Tim and 12 other Ford Specialists are ready to help you

JustAnswer in the News:

 
 
 
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
 
 
 

What Customers are Saying:

 
 
 
  • AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on. Rich D USA
< Last | Next >
  • AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on. Rich D USA
  • Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me. Molly USA
  • I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service. Jason V. Kirkland, WA
  • I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there. BR New Jersey
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC
  • used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future. David L. Richmond, TX
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil Marysville, CA
 
 
 

Meet The Experts:

 
 
 
  • Ron

    ASE Certified Technician

    Satisfied Customers:

    20942
    23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
< Last | Next >
  • http://ww2.justanswer.com/uploads/FO/fordguy4u/2011-12-17_222940_HPIM1257.64x64.JPG Ron's Avatar

    Ron

    ASE Certified Technician

    Satisfied Customers:

    20942
    23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
  • http://ww2.justanswer.com/uploads/MU/muddyford/2012-6-13_1204_1.64x64.png Chris (aka- Moose)'s Avatar

    Chris (aka- Moose)

    Ford Technician

    Satisfied Customers:

    22382
    16 years experience with Ford.
  • http://ww2.justanswer.com/uploads/JM/jmcdo28/2012-2-23_01655_resized.64x64.jpg John Mc's Avatar

    John Mc

    Ford Technician

    Satisfied Customers:

    5493
    19 years Ford Lincoln Mercury experience
  • http://ww2.justanswer.com/uploads/wmarti7/2009-4-18_04332_Avatar.jpg Chuck's Avatar

    Chuck

    ASE Certified Technician

    Satisfied Customers:

    1684
    33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance
  • http://ww2.justanswer.com/uploads/CR/crzydrvr00/2013-11-3_12123_246347.64x64.jpg Richard's Avatar

    Richard

    ASE Certified Technician

    Satisfied Customers:

    1518
    12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.
  • http://ww2.justanswer.com/uploads/BA/baddad1/2014-4-1_23659_avatar.64x64.jpg Mike V.'s Avatar

    Mike V.

    Auto Service Technician

    Satisfied Customers:

    789
    25 years experience on all makes and models, Licensed NYS Inspector.
  • http://ww2.justanswer.com/uploads/lostrider/2009-9-26_23144_php4VNWAA_c1PM1.jpg lostrider's Avatar

    lostrider

    Ford Technician

    Satisfied Customers:

    2940
    ASE Master Technician, Ford Senior Master Technician,Diesel certified, ASE Master, 22 yrs FORD exp.