How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask lostrider Your Own Question
lostrider, Ford Technician
Category: Ford
Satisfied Customers: 3075
Experience:  ASE Master Technician, Ford Senior Master Technician,Diesel certified, ASE Master, 22 yrs FORD exp.
Type Your Ford Question Here...
lostrider is online now
A new question is answered every 9 seconds

codes P0113,P0102,P1132

Resolved Question:

codes P0113,P0102,P1132
Submitted: 6 years ago.
Category: Ford
Expert:  lostrider replied 6 years ago.
HiCustomer Thank you for asking your question on JustAnswer. The other Experts and I are working on your answer. By the way, it would help us to know:

-What model is your Ford?
-How many miles are on your Ford?
-What type of engine is in your Ford?
-What have you already tried?
-Has there been any recent repairs done to the vehicle?
Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 6 years ago.
F-350 4 wd - 5.4 Dealer installed 2nd engine, about 50,000 miles this engine. Codes just came up this morning when started.
Expert:  lostrider replied 6 years ago.

Thank you for the reply, the P0102, P0113 are related to the Mass Air Flow sensor mounted on the air cleaner box, need to inspect and make sure the sensor is plugged in, here are some diagrams for the MAF sensor, check the harness to see if any wires are broken, look at both connectors in the diagrams.



For the P1132 code, if there is a problem with the MAF sensor it can cause this code, so you need to repair the MAF concerns first and clear the codes , then drive the truck to see if the P1132 comes back, if it does, its for the O2 sensor on the drivers side, the upper sensor closet to the manifold.hope this helps.

lostrider and 5 other Ford Specialists are ready to help you

Related Ford Questions