How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall (Cheeko) Your Own Question
Randall    (Cheeko)
Randall (Cheeko), Certified Mechanic Ford Motor Co.
Category: Ford
Satisfied Customers: 2395
Experience:  18 years as a Ford tech and still going
Type Your Ford Question Here...
Randall (Cheeko) is online now
A new question is answered every 9 seconds

How do i change a imrc actuator on a 2001 ford mustang

Resolved Question:

how do i change a imrc actuator on a 2001 ford mustang
Submitted: 6 years ago.
Category: Ford
Expert:  Randall (Cheeko) replied 6 years ago.

Hi, below are the steps from the ford manual, thanks


Intake Manifold Runner Control (IMRC) Actuator-3.8L


Removal and Installation

  1. Disconnect the battery ground cable.
  2. Drain the cooling system.
  3. Remove the upper intake manifold.
  4. Remove the fuel injector supply manifold.
  5. Remove the coolant bypass tube.
  6. Remove the bolt and heater water inlet tube at the back of the lower intake.



Randall (Cheeko) and 6 other Ford Specialists are ready to help you