How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 46869
Experience:  16 years experience
2499435
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

getting code p0766 and p2703 tow haul lignt is flashing changed

Resolved Question:

getting code p0766 and p2703 tow haul lignt is flashing changed solenoid body why ?please help.
Submitted: 7 years ago.
Category: Ford
Expert:  Tim West replied 7 years ago.
What kind of Ford and what engine size?
Customer: replied 7 years ago.
ford f250 sd 6.0l
Expert:  Tim West replied 7 years ago.
Thanks, XXXXX XXXXX get this to the proper expert
Customer: replied 7 years ago.
frod f250 6.0L deisel 2004 5r110w trans. getting codes p0766,p2703 if i try to give it to much fuel it shiftes crazy and tow hual lite flashes and wont shift all the gears but if i have tow hual on it does fine.
Expert:  Chris (aka- Moose) replied 7 years ago.

HelloCustomer

 

I'm Chris, Thanks for allowing me to help you here on Just Answer.

 

Both codes are related to the Direct clutch (5th gear). Code 2703 states to change out the solenoid (SSPC-D)and clear the code. If the codes come back then you must overhaul the trans and repair the leaking or slipping direct clutch.

graphic

Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 46869
Experience: 16 years experience
Chris (aka- Moose) and other Ford Specialists are ready to help you