How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott W. Your Own Question
Scott W.
Scott W., Ford Technician
Category: Ford
Satisfied Customers: 3288
Experience:  28 yrs. experience as Ford ASE Master Technician. Accolades include being a 2005 Ford PTS Regional Finalist and 2006 ASE Ford National Technician.
26022388
Type Your Ford Question Here...
Scott W. is online now
A new question is answered every 9 seconds

How do I remove a door panel on a 2004 Lincoln LS Is there

Customer Question

How do I remove a door panel on a 2004 Lincoln LS? Is there a diagram I can find somewhere?
Submitted: 6 years ago.
Category: Ford
Expert:  Scott W. replied 6 years ago.

Hello my name isXXXXX here is front door trim panel removal instructon's hope this helps. Thanks Steve W

 

 

graphic


Front Door Trim Panel Printable View (131 KB)

  1. Disconnect the battery. For additional information, refer to Section 414-00.
  1. To remove individual components only, carry out the listed steps.

    ComponentSteps
    Door trim panel1-7
    Garnish molding1-8
    Speaker cover1-9
    Applique1-11

  1. Remove the components in the order indicated in the following illustration and table.


    ItemPart NumberDescription
    1 23942 Window regulator control switch panel asembly
    Removal Note
    2 23A742 Screw cover
    Removal Note
    3 56914-5424 Screws (2 required)
    4 N806555-S424 Screws (3 required)
    5 W504246-S424 Screw
    6 239A04 Screw grommet
    7 23942/23943 Front door trim panel
    Removal Note
    8 20890/20891 Front door window garnish moulding
    9 601B48/601B49 Speaker grille
    10 - Nuts
    11 238A70/238A71 Door trim panel applique
    12 W708599-S Pin-type retainers (9 required)
  1. To install, reverse the removal procedure.

Item 1: Window Regulator Control Switch Panel Removal Note

  1. Disconnect the electrical connectors.

Item 2: Screw Cover Removal Note

  1. From the top of the cover on center, use a suitable tool, insert 2-3 mm and rotate to disengage the snap feature.

Item 7: Front Door Trim Panel Removal Note

  1. Disconnect the door lock control switch electrical connector.
  1. If equipped, disconnect the driver seat memory switch electrical connector.
Customer: replied 6 years ago.
Only the first picture sowed up, the second two didn't populate.
Expert:  Scott W. replied 6 years ago.

Hello again, I rechecked the instructions, there is only one picture, the one that came through, ignore those 2 boxes, Thanks Steve W