How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Al Smitty Your Own Question
Al Smitty
Al Smitty, ASE Certified Technician
Category: Ford
Satisfied Customers: 660
Experience:  ASE Master Tech, Ford Engine and Chassis Master Tech, Auto Tech Instructor
Type Your Ford Question Here...
Al Smitty is online now
A new question is answered every 9 seconds

Remove the blower motor in a 1999 ford contour for replacement?

This answer was rated:

How do you remove the blower motor in a 1999 ford contour for replacement?
Hello and thank you for using JustAnswer.
Here is the procedure.
Best of luck


  1. Remove the pushpins for the upper footwell trim panel on the passenger's side and remove it.

  1. Remove the blower motor.
  1. Disconnect the electrical connector.
  2. Lift the securing tab slightly.
    • Turn the blower motor approx. 30° counter-clockwise and remove it.


  1. To install, reverse the removal procedure. NOTE: Engage the securing tab for the blower motor.
Blower Motor Wheel


  1. Remove blower motor and blower motor wheel assembly.
  2. Remove blower motor wheel retainer from blower motor and A/C blower wheel assembly and remove A/C blower wheel.


  1. To install, reverse Removal procedure.


Al Smitty and 4 other Ford Specialists are ready to help you
Customer: replied 7 years ago.

After your answer to my question it took me less than 5 min. to remove the motor that I had been trying to remove for over an hour. THANK YOU FOR YOUR HELP!!

My pleasure.

Related Ford Questions